On-time switch! The engineering machinery industry enters the “National IV” era starting December 1st.
Release time:
2025-04-10
In December 2020, the Ministry of Ecology and Environment and the State Administration for Market Regulation jointly issued the amendment to the "Emission Limits and Measurement Methods for Diesel Engines Used in Non-Road Mobile Machinery (China Stage III and IV)" (GB 20891-2014), and also released its supporting technical specification "Technical Requirements for Emission Control of Non-Road Mobile Machinery" (HJ1014-2020). From December 1, 2022, all non-road mobile machinery with a power of 560 kW or less (including 560 kW) produced, imported, and sold, and their diesel engines, should meet the "National IV" emission standards. After five years of positive growth, the engineering machinery industry entered a downward cycle in the second half of 2021. The tightening of epidemic prevention policies, high global inflation risks, and the decline in economic prosperity have resulted in widespread market pressure on engineering machinery enterprises. Calls for a postponement of the implementation of "National IV" standards have been increasing within the industry. On July 22, 2022, according to the China Construction Machinery Industry Association, an application to postpone the implementation of the National IV emission standards for non-road mobile engineering machinery had been submitted. With the market downturn and high inventory pressure, whether or not to postpone "National IV" has become a key focus in the industry.
Calls for Postponing the Implementation of National IV Emission Standards
At the first press conference of the China Construction Machinery Industry Association held on July 22, the association announced a major piece of news—it is applying to the Atmospheric Environment Department of the Ministry of Ecology and Environment to postpone the implementation of the "National IV" emission standards for the engineering machinery industry to April 1, 2023.
The meeting explained that in 2022, due to the combined impact of various unfavorable factors both domestically and internationally, industry enterprises generally faced market pressure. In order to better prepare for the transition to National IV emission upgrades from the aspects of supply chain and industrial chain, to steadily promote the implementation of National IV emission standards, reduce the operating pressure on enterprises, and maintain stable and sustainable development of the industry, recently, the association, based on the policy inquiries and suggestions from enterprises regarding National IV emissions, submitted a report to the Atmospheric Environment Department of the Ministry of Ecology and Environment titled "Request for Postponement of the Implementation Time of National IV Emission Standards for Non-Road Mobile Engineering Machinery", suggesting that the deadline for complete machinery products to upgrade from National III to National IV emission standards be postponed from December 1, 2022 to April 1, 2023.
National IV Emissions to Be Implemented as Scheduled
According to the latest news from the Engineering Machinery Industry Environmental Protection Emission Exchange and Research Meeting held in Changsha on August 11, 2022, the switch from National III to National IV emission standards for engineering machinery will be carried out as scheduled on December 1, 2022, and there will be no further postponement.
With less than four months to go before the official implementation, the pressure from environmental protection and the impact of the epidemic mean that this standard transition faces tight time constraints and heavy tasks. Upgrading technology, clearing inventory, and updating channels are all becoming urgent pressures that are transferred to users, agents, and manufacturers. The combination of standard switching and industry downturn requires the engineering machinery industry to overcome several difficulties.
1. Technical and Cost Difficulties: The primary challenge in the emission upgrade process is the technical challenge. Traditionally, standard switching simply involved replacing the engine with one that meets the standard. However, the National IV standards are stricter and more complex, and the transition from National III to National IV is clearly not simply a matter of replacing the engine. Replacing the engine with one that meets the National IV non-road emission standards only completes 30% of the work; the remaining 70% must be carried out on the entire machine. Technological improvements may even lead to increased costs. From National III to National IV, different power ranges of non-road mobile machinery use different emission control technologies, resulting in varying cost increases. (Source: Compilation of publicly available information) 2. High Inventory Pressure: If technology and cost are the "must-pass" questions in emission upgrades, then the relatively high level of enterprise inventory for the nationwide implementation of National IV emissions on December 1 is a reality.
From the "moderately advanced infrastructure investment" at the end of 2021 to the recent "a package of policy measures to stabilize the economy", a series of national policies to stabilize growth have been implemented, but they have failed to reverse the downward trend of the industry—sales of major industry products have declined significantly, the operating Achievements of major industry enterprises have declined, and overall industry sales have fallen sharply. According to data from the China Construction Machinery Industry Association, from January to July 2022, domestic sales of excavators reached 100,374 units, a year-on-year decrease of 51.3%. From January to July 2022, domestic sales of loaders reached 48,839 units, a year-on-year decrease of 33.2%. During the market downturn, how to clear inventory on time and according to schedule is a real problem faced by enterprises. Whether inventory clearance will exacerbate industry involution remains unknown. 3. Pressures on Both Supply and Demand Sides: On the supply side, since 2021, the global chip shortage has fully erupted, and engines have been severely affected. As core components for standard upgrades, engines are still subject to external constraints, especially some high-power engines that still rely on imports. On the demand side, National III inventory equipment that failed to be digested as scheduled after the standard transition can only be cleared as used equipment in 2023, which will impact the sales of new National IV equipment in the short term.
Instead of worrying, it is better to face it directly: Is delaying the implementation of "National IV" really a panacea? Not necessarily...
Technically Feasible: Overall, the requirements of the "National IV" standard are basically the same as those of the National V standard for diesel vehicles. The mainstream technical route is to use selective catalytic reduction (SCR) and diesel particulate filters (DPF). Some manufacturers also use diesel oxidation catalysts (DOC) and exhaust gas recirculation (EGR) as auxiliary technologies.
These technologies have been successfully applied to National V diesel vehicles, and corresponding products in Europe and the United States have been supplied to the market for many years. From the perspective of the technological path, it is feasible for engineering machinery to upgrade from "National III" to "National IV".
Product Reserves Are Ready: According to data from the Non-Road Mobile Machinery Environmental Protection Information Disclosure Platform, as of March 2022, information on 1017 National IV machines has been publicly disclosed.
From the environmental protection information disclosure system, we can see that leading host manufacturers have already completed their product reserves for their core products. From the perspective of product reserves, it is feasible for engineering machinery to upgrade from "National III" to "National IV".
Standard Switching Can Drive Industrial Transformation and Upgrading: China's engineering machinery industry has developed rapidly, seizing market share in the field of engineering machinery complete machines, and its competitiveness is constantly improving; however, in the field of core components, it faces the problem of "lack of high-end products and homogenization of low- and mid-range products". There is a large import volume of high-end hydraulic components, high-end chassis, and large-tonnage engines, facing the constraints of high Price, long cycle times, and unstable supply.
This upgrade from National III to National IV will help host, diesel engine, and related component manufacturers to improve product planning and technological upgrades, accelerating the development process of intelligent, digital, and information-based engineering machinery.
In conclusion, the initial intention behind calling for the postponement of the National IV emission standards is to provide a little more warmth to the engineering machinery industry, which is in the midst of a cold winter. However, market competition is always cruel; the worse the market conditions, the more it reflects the overall competitiveness of enterprises, and the more it is a critical turning point for industry restructuring. After all, survival of the fittest is the law of the jungle.