Selection Guide for Internal Circulation Ball Screw Pair
Release time:
2026-11-02
Learn how to read ball screw model codes, match diameter & lead, select rotation direction, ball turns and accuracy grades. Get the 6 key parameters before ordering ball screws for CNC and automation equipment.
1. Understand Ball Screw Model Code Rules
Ball screw model numbers are systematic manufacturing instructions instead of random letters and numbers. The standard marking sequence is: structure code + nominal diameter + nominal lead + rotation direction + loaded ball turns + accuracy grade.
Take the model 32-10-5 as an example:
- 32: Nominal diameter d₀ = 32 mm
- 10: Nominal lead Ph = 10 mm
- 5: Loaded ball turns = 5 circles
Once these three values are fixed, the load capacity, rigidity and overall size of the ball screw are determined.
Difference Between G and GD Nuts
- G type: Internal circulation single nut with fixed deflector. Simple structure, low cost. Axial clearance can be adjusted with single-nut anti-backlash structure. Suitable for general transmission and medium positioning accuracy.
- GD type: Internal circulation double nut with spacer preload. An equal-thickness spacer is installed between two nuts. Preload force is adjusted by changing spacer thickness. It delivers much higher axial rigidity with zero backlash during reverse movement, ideal for high-precision positioning transmission.
Features of Internal Circulation Structure
Steel balls recirculate inside the nut via a fixed deflector. This design keeps the overall structure compact with small outer diameter, perfect for limited installation space. The ball circulation path is short and smooth, resulting in low noise and stable running performance.
2. How to Match Nominal Diameter and Lead
Nominal diameter d₀ is selected according to load and rigidity requirements. Below are standard diameter-lead combinations and application scenarios:
表格
| Nominal Diameter d₀ (mm) | Standard Lead Ph (mm) | Typical Application | Rigidity Performance |
|---|---|---|---|
| 12, 16 | 2.5, 4, 5, 10 | Small precision slides, instrument feed | High resolution with small lead |
| 20, 25 | 4, 5, 6, 8, 10, 20 | General machine tool feed, automation equipment | Balanced speed and thrust |
| 32, 40 | 4 ~ 32 | Medium & large machine tools, heavy-load positioning | High rigidity and heavy load capacity |
| 50 ~ 160 | 5 ~ 40 | Large special machinery, heavy industrial equipment | Ultra-high load capacity |
Core rule: Small lead brings low feed speed under the same rotating speed, larger thrust and higher positioning resolution. Large lead is designed for high-speed long-stroke movementThomson.
3. Confirm Rotation Direction and Loaded Ball Turns
Rotation Direction
Right-hand thread is the default option without special note. Left-hand thread is only used for synchronous reverse motion on special equipment. You must mark left rotation clearly on drawings when ordering; otherwise, right-hand thread will be produced.
Loaded Ball Turns
More ball turns mean more steel balls sharing the load, which increases rated dynamic load and service life. However, higher turns also raise friction torque and working temperature.
- General application: 3~5 turns
- Heavy-load application: More than 5 turns Note: Multi-circle design only makes sense when matched with small lead specifications.
4. Select the Right Accuracy Grade
Ball screw assemblies are divided into two categories: P (positioning grade) and T (transmission grade). There are seven accuracy grades: Grade 1 (highest), 2, 3, 4, 5, 7, 10SCHNEEBERG....
- 16 mm diameter: Can reach Grade 1 / 2 within 500 mm length
- 32 mm diameter: Can reach Grade 1 / 2 / 3 within 2000 mm length
- Diameter above 100 mm: Keep Grade 5 / 7 / 10 even for length over 3000 mm
Selection principle:
- CNC machine tools and measuring equipment: Choose P grade, Grade 3 or higher
- Lifting, feeding and ordinary transmission mechanisms: Choose T grade, Grade 5 or 7 Avoid over-specifying high precision blindly, which will greatly increase procurement cost.
5. Six Items to Confirm Before Placing an Order
Only providing a model number will lead to wrong production. Fill out this checklist and send it to the manufacturer:
- Mounting type: fixed-fixed, fixed-supported, fixed-free
- Support bearing type and preload requirement
- Nut stroke and both-side residual travel (Residual travel: 16 mm for 4 mm lead; 20 mm for 5 mm lead; 40 mm for 10 mm lead)
- Protection requirement: dust-proof, water-proof or high-temperature resistance
- Pre-stretch design to compensate thermal deformation
- Relationship between total thread length and effective travel: Effective travel Lu = Lx + 2Le + Ln
Frequently Asked Questions
- Question: What is the difference between G and GD ball screw nuts? Answer: G is single nut without preload, low cost for medium precision. GD is double nut with spacer preload, zero backlash and higher rigidity for high-precision positioning.
- Question: Should I choose P grade or T grade ball screws? Answer: P (positioning grade) for CNC and measuring instruments (Grade 1~5). T (transmission grade) for lifting and feeding machinery (Grade 5~10) to save cost.
- Question: What six items must be confirmed before placing a ball screw order? Answer: Mounting arrangement, bearing preload, nut stroke & residual travel, dust/water protection, thermal pre-stretch compensation, total thread length vs effective travel.