【 Pre sales technical points 】 Interpretation of the design parameters of the 5TG-FC series (202mm cylinder diameter) front top dump truck oil cylinder to ensure accurate selection
Release time:
2026-09-28
When choosing a cylinder, do not focus only on height and weight — lifting angle, system pressure and mounting method equally determine real-world performance. This article reviews the selection-stage details that are easiest to overlook for this 5-stage hinge-mounted front-top hydraulic cylinder, for your reference.
Pressure Rating
The rated working pressure is 20 MPa, above the common 16 MPa grade, making it suitable for heavy-load dump applications.
Before shipment, our factory performs an overpressure holding test to ensure a safe margin under heavy, bumpy working conditions.
Recommendation: Confirm that your hydraulic system's rated pressure can match the 20 MPa working demand and is fitted with a relief valve, so momentary pressure spikes cannot exceed the cylinder's withstand capacity.
Thrust and Load
Stage thrust values are 65.4 / 51.3 / 39.5 / 30.1 / 22.3 tonnes. Less extension means more thrust; more extension means less thrust — a normal physical characteristic of multi-stage cylinders.
The first-stage thrust is the highest (65.4 t), used to overcome the static inertia of the load and start lifting. The final-stage thrust of 22.3 t maintains the posture during high-position dumping.
Recommendation: This model has a 202 mm bore, 6500 mm stroke, 5 telescopic stages and 20 MPa rated pressure — a high-tonnage, ultra-long-stroke front-top cylinder for heavy dump trucks and large-volume bodies. When sizing, calculate the required lifting force based on actual body volume, material density and dumping angle.
Hinge Mounting Notes (This Product Uses Hinge Mounting)
Two hinge-pin diameters are available, 60 mm and 65 mm, both precision-machined. The fit clearance with the customer's frame hinge bushings is tightly controlled — too large causes impact damage, too small prevents assembly.
The mounting base must be sufficiently rigid, and the two hinge pins must stay coaxial. Welding deformation of the base bends the piston rod or causes eccentric seal wear, drastically shortening service life.
Special reminder: With high thrust and an ultra-long stroke (6500 mm), the moment exerted on the mounting base at full extension is extreme. The frame mounting area must be professionally reinforced. Hinge mounting requires good alignment between the frame hinge seat and the cylinder hinge pins — confirm the seat's positional accuracy and load capacity before installation.
Protective Sleeve
The protective sleeve has a 273 mm diameter and shields the inner barrels and piston rods from external damage by mud, gravel and other debris. With five stages, the sleeve's protection is especially important.
Recommendation: During installation, confirm sufficient clearance between the sleeve, the frame and the body to avoid motion interference.
Oil-Port Connection Specifications
Standard interfaces are configured by default; other connection types can be supplied on request.
Recommendation: This model has a large flow demand. Confirm that the port size matches the system flow, to avoid throttling that slows lifting speed.
Design Parameters Required Before Ordering
To ensure ready-to-install fit, please provide the following information:
- Maximum dump angle of the body (to check that the cylinder at full extension does not interfere with the chassis or body).
- Center distance between the two hinge pins when the cylinder is fully retracted (this dimension directly determines the custom stroke; the 5-stage cylinder's retracted length is long, so vehicle layout space deserves special attention).
- Preferred oil-port connection type.
- Minimum ambient temperature in the operating region (extreme cold requires special low-temperature seals).
- Approximate vehicle empty weight and body center of gravity (for load verification).
- Maximum hydraulic system flow (to confirm the lifting speed meets the duty requirements).
Customization Capability
- Stroke: Customizable within a range. For a 5-stage cylinder with many barrels and sleeves, retracted and extended lengths must be checked together during customization.
- Surface treatment: Standard hard chrome plating; an enhanced anti-corrosion coating is optional for corrosive-cargo transport applications.
- Sealing system: Different seal materials can be matched to high/low temperature, high-frequency use and other duty conditions.
Technical Support We Provide
During the drawing phase we provide the 3D model (STEP format) free of charge, so you can load it directly into your vehicle design for interference checking and assembly simulation.
For high-tonnage, ultra-long-stroke applications, we can also provide mounting-base load analysis recommendations.
Conclusion
Choosing the right cylinder is not just about the thrust and stroke on the data sheet. Vehicle duty, mounting conditions and environmental factors must all be considered at the design stage. This product is a hinge-mounted front-top cylinder positioned for heavy-load, ultra-long-stroke applications. Before drawing, share your detailed working conditions with our technical team so we can confirm the selection before you place the order.
Frequently Asked Questions
What information do I need to provide before ordering?
Provide the maximum body dump angle, the center distance between the two hinge pins at full retraction, preferred oil-port type, minimum ambient temperature, approximate vehicle weight and body center of gravity, and maximum system flow.
Why does this 5-stage cylinder need a reinforced mounting base?
With 20 MPa working pressure, 65.4 t first-stage thrust and a 6500 mm stroke, the moment on the mounting base at full extension is extreme, so the frame area must be professionally reinforced and the hinge seats must be accurately aligned.
What mounting clearance must be left around the protective sleeve?
Leave sufficient clearance between the 273 mm protective sleeve, the frame and the body to prevent motion interference; also keep the sleeve free of trapped mud and debris to maintain protection of the five telescopic stages.