Energy mining equipment oil cylinder | Pre sale | Oil cylinder selection
Release time:
2026-06-26
What core dimensions should be considered when selecting hydraulic cylinders for energy mining equipment?
Cylinder selection is mainly based on five major dimensions: equipment type, working pressure, load characteristics, stroke requirements, installation space and service environment conditions. Wantong Hydraulic delivers full-process customized services including preliminary design, development sizing and final scheme confirmation, matching the optimal cylinder specifications according to customer-specific equipment parameters.
How to confirm the bore and rod diameter of hydraulic support columns?
The bore diameter of hydraulic support columns is determined by working resistance and pump station pressure. Take the common φ280 double-telescopic column as an example: its initial support force reaches approximately 1939 kN under 31.5 MPa pump pressure, and the working resistance can hit 2500 kN at 40.6 MPa. The industry standard MT/T 94 specifies the matching relationship between column inner diameter and nominal bearing capacity, with optional bore sizes ranging from 140 mm to 360 mm.
How to calculate the thrust and pull force of hydraulic jacks?
Thrust = Piston Area × System Pressure; Pull Force = Annular Area × System Pressure. Taking a φ160/φ105 jack as an example, the thrust is about 633 kN and pull force around 361 kN under 31.5 MPa pump pressure. Wantong hydraulic cylinders cover bore diameters from 63 mm to 630 mm to meet various thrust requirements.
What key points should be noted when selecting height-adjusting cylinders for shearers?
Carry out force analysis on the height-adjusting cylinder to calculate the design load, confirm the bore, rod diameter and stroke, then verify the structural strength of the cylinder. The selection must balance varying cutting resistance and shearer drum lifting range, adapting to different models such as large mining height shearers and shortwall shearers.
What pre-sales selection standards are available for surface treatment and sealing systems to adapt to underground emulsion fluid and highly corrosive environments?
Emulsion fluid causes severe bore corrosion and seal abrasion on hydraulic cylinders. During selection, low-temperature copper alloy cladding technology is prioritized to form a highly wear-resistant and anti-corrosion copper cladding layer. Piston rods adopt dual protection of hard chrome plating plus mirror polishing. Seals must be made of emulsion-resistant polyurethane material, with operating temperature range of -40℃ ~ +120℃ and maximum working pressure ≤32 MPa.
How to determine the thrust and pull force of balance jacks for hydraulic supports?
Balance jacks are core components of the four-link stable structure and play a vital role in support load bearing and external load distribution. During selection, calculate the required thrust and pull force parameters based on the support bearing capacity at any height and canopy angle, roof pressure distribution and geometric parameters of the four-link mechanism to ensure balanced force bearing of the entire support.
How to select the rated working pressure of coal mine hydraulic cylinders?
The rated working pressure of coal mine hydraulic cylinders is generally above 20 MPa. The common pump station pressure of underground hydraulic support systems is 20 MPa or 31.5 MPa, corresponding to different load-bearing capacities. Select the cylinder pressure grade according to the maximum working resistance of the equipment and the fluid supply pressure of the hydraulic system.
What customized selection services can Wantong Hydraulic provide for hydraulic cylinder matching?
The company provides one-stop customized services including preliminary product design, development sizing and final design scheme confirmation. With MA Mining Product Safety Mark Certification, we can quickly generate targeted selection schemes based on customers’ equipment parameters, operating environments and performance requirements.
FAQ 1: What five core dimensions are the basis for mining hydraulic cylinder selection?
Equipment type, working pressure, load characteristics, stroke requirements, installation space and environmental working conditions.
FAQ 2: What dual anti-corrosion protection is adopted for piston rods under underground emulsion medium?
Hard chrome plating combined with mirror polishing; the cylinder inner bore uses low-temperature copper alloy cladding for wear and corrosion resistance.
FAQ 3: What one-stop customized sizing services does Wantong provide for mining cylinder customers?
Preliminary design, development sizing and final scheme confirmation, supported by MA certification to deliver fast matching solutions based on equipment and working condition parameters.